How to read guitar tab
What the six lines and the numbers mean, plus hammer-ons, pull-offs, slides, bends and other symbols.
What tab is
Tablature, or tab, is a picture of the fretboard. It tells you which string and which fret to play, so you can start without knowing note names. Most tabs on this site show standard notation and tab together.
Six lines, six strings
The six horizontal lines are the six strings. The top line is the thinnest string (high E) and the bottom line is the thickest (low E). That is upside down compared with how you see the guitar when you look down at it, which confuses almost everyone at first.
Numbers are frets
A number on a line is the fret to press. 0 means play the string open without pressing anything. A 3 on the bottom line means press the 6th string at the 3rd fret. Numbers stacked vertically are played together. Read left to right.
Common symbols
- h (hammer-on): sound a higher note by hitting the string with a fretting finger, without picking. Example: 5h7
- p (pull-off): pull the fretting finger off with a slight flick to sound a lower note. Example: 7p5
- / and \ (slide): keep the string pressed and slide to another fret.
- b (bend): push the string to raise the pitch. “full” is a whole step, “1/2” a half step.
- ~ (vibrato): shake the note to make it sing.
- x (dead note): rest your finger on the string without pressing, for a percussive click.
- PM (palm mute): rest the edge of your picking hand on the strings near the bridge for a short, chunky sound.
Rhythm comes from the notation
Tab numbers alone don’t tell you how long each note lasts. On this site the notation and stems are drawn above the tab, so read rhythm from there. If it is still unclear, press play, drop the speed to 50–75%, and play along. The current position is highlighted as it plays.